Cost Calculators

EV Charging Time Calculator: Check Your Overnight Charge

THE ANSWER

Home charging time depends on the energy you need to add and the power your car can actually use. In the example below, a 60 kWh usable battery going from 20% to 80% needs 36 kWh. With a 7.2 kW vehicle AC limit and an assumed 90% wall-to-battery efficiency, the estimate is 5 hours 34 minutes. Change the inputs to check your own overnight window.

This EV charger calculator covers steady single-phase AC home charging at 120, 208 or 240 volts. Enter the installed equipment’s configured charging current, rather than the number on its circuit breaker. The tool estimates time; it does not choose electrical wiring or approve an installation.

Battery and charge target
Configured AC supply

Use the current your installed equipment is allowed to deliver. These presets only change the calculation:

Vehicle limit and available time

90% is an illustrative assumption, not a rating for your vehicle. Use its AC charging specification, not its DC fast-charging peak.

Turn on JavaScript to calculate your inputs. The worked example and comparison table below also explain the estimate.

Find the inputs that describe your car

Usable battery capacity is the energy available within the vehicle’s managed operating range. Look for that figure in the manufacturer’s specifications; a larger gross or total capacity can overstate the energy represented by the dashboard’s charge percentage. The calculator treats the displayed percentage as proportional to usable capacity, a planning approximation.

Charging current is the equipment’s configured output in amps. It can be below the product’s advertised maximum. For example, Tesla’s Wall Connector table separates circuit-breaker ratings from charging current: its 60 A circuit configuration supplies up to 48 A, while its 40 A configuration supplies up to 32 A. Those are that product’s published configurations, not permission to set another charger the same way. See the manufacturer’s current table.

The car’s AC input limit is the maximum AC charging power it can accept. A more powerful wall unit cannot force extra power into a lower-rated car. Tesla’s onboard-charger explanation describes the conversion from AC supply to battery DC; use your own model and model year’s AC input limit at the selected supply voltage. If a specification gives battery-side output instead, confirm the AC input rating before entering it here.

How the charging-time calculation works

The tool first calculates supply power, then uses the lower of that result and the car’s AC limit. It applies your efficiency assumption once, after that limit. The volts × amps calculation assumes approximately unity power factor and ignores supply-voltage variation; it is not a three-phase calculation:

  1. Energy to add: usable battery kWh × (target % − starting %) ÷ 100.
  2. Available AC power: volts × charging amps ÷ 1,000, capped at the vehicle’s AC input limit.
  3. Estimated battery power: available AC kW × efficiency ÷ 100.
  4. Estimated hours: energy to add ÷ estimated battery power.

For the default example, 60 × (80 − 20) ÷ 100 gives 36 kWh. The supply can provide 240 × 32 ÷ 1,000 = 7.68 kW, but the example car accepts 7.2 kW. At 90% efficiency, 6.48 kW reaches the battery in this simplified model. Dividing 36 by 6.48 gives 5.56 hours, rounded up to 5 hours 34 minutes.

Three limits in the example charging calculationA 7.68 kilowatt AC supply is capped at a 7.2 kilowatt vehicle input limit. With assumed 90 percent efficiency, estimated battery power is 6.48 kilowatts. One example, from wall to battery 240 V × 32 A7.68 kW Vehicle AC limit7.2 kW Assumed 90% stored6.48 kW →→ 36 kWh needed ÷ 6.48 kW ≈ 5 hours 34 minutes
Illustrative steady-power calculation. The car’s actual charge rate can vary during a session.

Compare charging settings for the same battery

This table keeps the example battery, charge target, 7.2 kW vehicle limit and 90% efficiency unchanged. It shows why an upgrade can help substantially at first, then stop helping once the car becomes the limit.

Example configured supplyAC power used20% to 80%, estimated
120 V, 12 A1.44 kW27 hr 47 min
240 V, 16 A3.84 kW10 hr 25 min
240 V, 32 A7.2 kW, vehicle limited5 hr 34 min
240 V, 48 A7.2 kW, vehicle limited5 hr 34 min

These are calculation scenarios, not recommended electrical configurations. A different car, starting percentage or efficiency changes every time in the table. Our Level 1 and Level 2 charging guide explains the equipment choices and connector names.

Check a normal night, then a demanding one

Start with the charge you usually have when you park and the charge you want at departure. A full empty-to-full session may be much larger than your normal daily top-up. Then repeat the calculation for a late arrival or a longer driving day. Count only the hours during which charging will actually run, including any timer or electricity-rate schedule you use.

In the default example, an eight-hour window exceeds the calculated time. A four-hour window adds 25.92 kWh and reaches about 63.2%, rather than the 80% target. The result stops adding energy at the target, so leaving the car plugged in longer does not make it display an impossible charge percentage.

For two EVs, check each vehicle’s own available power and charging window. Do not give both cars the full shared supply in separate calculations. Some systems redistribute power as household demand or other charging sessions change; Tesla’s power-management guide describes examples. A fixed-rate calculation cannot reproduce that changing schedule.

Why the car may take longer

The U.S. Department of Energy identifies battery capacity, starting charge, the vehicle’s internal charger and the charging equipment as time factors. Its charging-equipment overview is a useful check on why one quoted charging time cannot describe every vehicle.

Our 90% default is editable because charging efficiency is not fixed. FuelEconomy.gov explains that conversion and battery losses vary with the vehicle, charging system, battery state and weather. Heating or cooling the battery can also affect how much supplied energy becomes stored charge.

For sensitivity, the same 36 kWh example takes about 6 hours 15 minutes at 80%, 5 hours 34 minutes at 90%, or 5 hours 16 minutes at 95%. These are chosen assumptions, not a claimed efficiency range for all EVs. Compare the estimate with a real session under similar conditions and leave time for variation.

This model assumes steady power. It does not model a vehicle’s reduced charge rate near full, cold-weather behavior or DC fast-charging curve. Follow the manufacturer’s normal charge-limit advice; the tool’s 80% example is not a universal battery-care recommendation.

Frequently asked questions

Can I enter the breaker’s amp rating?

No. Enter the configured charging current allowed by the equipment and installation. The breaker rating and charging current can differ. Use the home EV charger installation checklist to prepare questions for the electrician.

Why does a larger charger sometimes give the same answer?

The calculator caps power at the vehicle’s AC input limit. Once that limit is reached, increasing the supply setting does not shorten the estimate.

Will this predict a public fast-charging stop?

No. This tool estimates AC home charging. A DC fast-charging session needs the vehicle’s charging curve, starting battery conditions and the station’s actual delivery limits.

Does the result include a wire size or installation approval?

No. Conductor selection, protective devices and available electrical capacity require the applicable equipment instructions and local installation assessment. The calculator only compares energy, power and time.

Final Takeaway

Compare the charging power your car can use with the energy it normally needs before departure. Enter usable battery capacity, configured charging current and the vehicle’s AC limit, then test a shorter window and a less optimistic efficiency assumption. The useful result is a workable routine with room for variation.

Main Sources

Sources checked October 22, 2026. The calculations, comparison scenarios and diagram are Garage Sized’s own illustrative model.

  1. U.S. Department of Energy, Alternative Fuels Data Center: charging equipment and charging-time factors.
  2. FuelEconomy.gov: energy conversion and charging losses.
  3. Tesla Support: Wall Connector output settings, onboard charging and power management. Model examples only.